Haus F46 — A Family Home supported by the sloping terrain.
On a sloping Fallingbrook site, Haus F46 brings family rooms, places to work and a walkout lower level into a home planned around the owners’ daily routines.
Family Life across a Sloping Site
The brief for Haus F46 combined three bedrooms, two home offices and second-floor laundry with shared rooms for cooking, dining and gathering. The owners also needed substantial parking for a vintage-car collection. They hoped to start construction within three months of appointing the studio, making the approval sequence an early part of the design work. The 37-foot-6-inch lot in Fallingbrook, Scarborough, slopes toward the street. The design brings the lower level into the house’s daily sequence. A courtyard brings daylight to this floor and provides direct outdoor access. The completed rear yard landscape includes a pool and cabana, extending family activity beyond the home’s interior. The three-car garage is set into the slope and continues beneath the front porch. This establishes a solid base for the two storeys above while accommodating the owners’ cars within the building. The driveway is cut into the slope, with stairs rising to the porch above the terraced front yard and residential street.Rooms for Gathering, Work and Retreat
The kitchen, dining and living areas share the main floor, with each occupying a defined part of the plan. A separate office and a generous foyer keep work and arrival apart from the principal family rooms. Upstairs, three bedrooms, a second office and the laundry are grouped on one level. Placing everyday work and laundry close to the rooms they support reduces movement between floors. The exterior is composed as a series of clearly defined volumes. Whitewashed brick forms the base, with fine white stucco and thermally treated birch above. An extra-fine black stucco canopy extends toward the entrance, marking the approach and drawing attention to the stair beyond. The limited palette gives each volume a distinct role while supporting the composition.A Phased Permit Sequence
The requested program required a variance as it exceeded the permitted floor space for the lot. We developed an initial compliant design with selected double-height spaces that could remain open or be enclosed if additional floor area was approved. The first building permit allowed construction to begin while the Committee of Adjustment application proceeded. After approval and the appeal period, revised permit drawings were submitted to complete the planned programme. This sequence reflects the circumstances and approvals of Haus F46. The project was completed approximately 13 months after our first site visit, a period that included design, approvals and construction.
Begin with a Conversation
If you are considering a custom home in Toronto or the GTA, an initial conversation can help establish how the site, programme and approval requirements should inform the design from the outset.
Contact: info@baukultur.ca
Project Information
Type
Custom home; new construction
Location
Fallingbrook, Scarborough, Toronto, Ontario
Year of Completion
2022
Size
Approximately 2,650 sq. ft. above grade and 1,500 sq. ft. below grade
Photographer
baukultur/ca
Lot Frontage
37 feet 6 inches
Program
Three bedrooms, two offices, second-floor laundry, walkout lower level, three-car garage, pool and cabana
Team
Owner (Builder), S. Farzam Behboudi, P.Eng. (Structural engineering), Fuzion HVAC Design (HVAC design)
Key Materials
Whitewashed brick, fine white stucco, thermally treated birch and extra-fine black stucco
Our Role
Schematic design, design development, permits and approvals, Committee of Adjustment application, consultant coordination and construction-phase consultant to the builder




